Vepel sp-1 vs. Melrin 7001

Vespel ® Sp-1 le Meldin® 7001 polyimide Rods

Vespel® SP-1 offview from dupont:

E entsoe ka lihlahisoa tsa RUPINE TSE KHOLO TSE KHOLO TSE KHOLO TSE KHOLO TSE KHOLO TSE LING TSA BOPHELO, VESPEL ® SP-1 e fana ka matla a maholo a 'mele le ho ba thata, e kopantsoeng le thepa ea motlakase e ntle ea motlakase le ea futhumatsang ea pormal ea litlolo tsa tsohle tsa Vepel.

Likopo tse tloaelehileng li kenyelletsa li-spacers, lijana tsa ho rekisoa, litulo tsa valis, libolo, lipekere, li-peppip le li-poppets.

SP-1 VESPEL

Kakaretso ea Melrin ka Saint Gobain:

E entsoe ke Saint Gobain`

Thepa le khanyetso e phahameng ea lik'hemik'hale tse phahameng ka lik'hemik'hale tse ngata ho mofumahali oa setsomi. Melrin 7001 e loketse motlakase le

Liphoso tsa litlolo tse shebahalang li le boima. Ho etsa lintho tse ngata ho feta li-ceramics, 'me boima ba bobebe ho feta litlolo, Meldin 7001 ke a

Khetho e tsebahalang bakeng sa likarolo tsa sebopeho ka aerospace le likopo tse ling moo Metlamo e nkang e le ea lakatsehang.

meldin 7001

Thepa	Mokhoa oa ASTM	Diyuniti	Vespel ® SP-1	Melrin® 7001
Mochini
Matla a Tenstile 73 ℉ (23 ℃)	D-638	PSI (MPA)	---	12 500 (86)
Matla a Tenstile 73 ℉ (23 ℃)	D-1708	MPA (KPSI)	86.2 (12.5)	---
Tenssile matla a 500 ℉ (260 ℃)	D-638	PSI (MPA)	---	5,400 (37)
Tenssile matla a 500 ℉ (260 ℃)	D-1708	MPA (KPSI)	41.4 (6.0)	---
Elongation 73 ℉ (23 ℃)	D-638	%	---	7.5
Elong e 500 ℉ (260 ℃)	D-638	%	---	4.5
Matla a Floexural 73 ℉ (23 ℃)	D-790	PSI (MPA)	---	15,200 (105)
Matla a Floexural 73 ℉ (23 ℃)	D-790	MPA (KPSI)	11 0.3 (16.0)	---
Flexural Modulusuus 73 ℉ (23 ℃)	D-790	PSI X 105 (GPA)	---	4.6 (3.2)
Flexural Modulusuus 73 ℉ (23 ℃)	D-790	MPA (KPSI)	310 2 (450)
Khatello ea maikutlo ea khatello ea maikutlo 1% strain	D-695	PSI (MPA)	3,600 (24.8)	3,300 (22.7)
Khatello ea maikutlo ea 10% strain	D-695	PSI (MPA)	19,300 (133.1)	18,000 (124)
Modulus e hatella	D-695	PSI X 105 (GPA)	---	2.9 (2.0)
Modulus e hatella	D-695	MPA (KPSI)	2413 (350)	---
Tekanyetso ea poisson ea poisson 73 ℉ (23 ℃)			0.41	0.33
Armal
CardA e lekanang le ea 75 ℉ ho 500 ℉ (24 ℃ ho 260 ℃)	E-831	in / in / ℉ X 105 (M / m / ℃)	---	2.7 (5.0)
Ka kotloloho ea likhatiso tse 73 ℉ ho fihlela 500 ℉ (23 ℃ ho 260 ℃)	D-696	in / in / ℉ (m / m / ℃)	45 (25) 54 (30)	---
Motlakase
Matla a Diectric	D-149	V / mil	320	450
Matla a Diectric	D-149	MV / m	22	18
Tse ling
Matla a khoheli a itseng	D-792
Ho Nchafatsa Metsi			1.43	1.43
Lihora tse 24 73 ℉ (23 ℃)	D-570	%	0.24	0.23
Lihora tse 48 122 ℉ (50 ℃)	D-570	%	0.72	---
Equilibrium, 50% RH	D-570	%	1.0-1,0.3	---
LITLHAKISO TSA BOPHELO
Astm d 6455-99-99		TLHOKOMELISO	Tlanya 1m	Tlanya 1m
Ams sae 364g		TLHOKOMELISO	Sehlopha sa 1, Foromo M	Sehlopha sa 1, Foromo M
Mil-R-46198 Resin, Polyimide, e hatelletsoeng kapa e hatelloa le ho ts'oaroa		TLHOKOMELISO	Tlanya 1m	Tlanya 1m

Liphetho li ile tsa ba le lishiti tsa data tse hatisitsoeng tsa fektheri bakeng sa marang-rang

Lintlha tsena li oela ka har'a mefuta e tloaelehileng ea thepa empa e sa lokela ho sebelisoa ho theha meeli ea litlhaloso le ho sebelisoa e le 'ngoe e le motheo oa

Moralo. Li-poster tsa litsebi li nka ho tlamaha kapa ho phatloha ha morero leha e le ofe o behiloeng ke ona kapa liphetho tse fumanoang mabapi le tsena

Lihlahisoa. Litlhoko tsa 'nete li ka fapana. Lisebelisoa tsa Isostatic tsa Isostantine tse bontšitsoeng kaholimo li hlahisa likarolo tse nang le likhoele tse entsoeng ka khatello kapa tse hlahisoang ke tataiso.

Doupont & Saint Gobain e 'ngoe le e' ngoe e etsa liteko tsa astl ho litlhaloso tse fapaneng tsa astm kahoo papiso e itseng ea lehlakore e ne e sa fumanehe.

• Vespel® ke lebitso la khoebo la Ei Dupont Denemours

• VESPEL® Foromo: http://www2.dupon.com/vepel/en_us

• Melrin® ke lebitso le ngolisitsoeng la khoebo la Gont Gobain