| Mofuta oa Lekhetho: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Laela: | 1 Kilogram |
| Lipalangoang: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Setšoantšo sa No.: Ketron® GF30 PEEK
Mochine: Ketron
| Ho rekisa lihlopha | : | Kilogram |
| Mofuta oa Sephutheloana | : | Sephutheloana sa kantle ho naha |
The file is encrypted. Please fill in the following information to continue accessing it
Ketric® GF30 PEYETHERTHEEEEEEHONEEPHE POBER FIBER FANDITING LE BOTSOALLE BA BORARO BA BORARO, MOSALI. Ka kenyelletso ea likhoele tsa khalase, ketron® GF30 Pete e na le sekhahla se tlase sa ho hola le Foreulus e phahameng haholo. Ntle le litšobotsi tsena, Ketron® Gf30 Juters hangata e hauheloa bakeng sa lits'ebetso tse ntlafalitsoeng, ho satalla, haholo mochesong o kaholimo ho 300 ° C.
Thepa ea thepa
E khahliloe bakeng sa likopo tsa sebopeho se hlokang matla a ntlafalitsoeng, ho satalla, kapa botsitso, haholo mochesong o kaholimo ho 300 °
Modululus e phahameng haholo
Ho senya ho hanyetsa le ho ba thata
Tekanyo e tlase ea kantle
Karohano e hanyetsanang
Bokhoni bo ikhethang bo tsitsitseng
Li-geometries tse fumanehang
Ketron® GF30 Pete Stock DEPS DOPS e akaretsa mefuta e fapaneng ea boholo ba li-geometries tse latelang: turular, molamu, molamu
Mebala e teng
Ketron® GF30 Peterole Mefuta e latelang: tlhaho (beige)
Thepa ea senotlolo
Ho tsitsipana ho matlafatsang ka mokhoa o tsitsitseng ka lebaka la peek e sa tsebeng letho
Matla a phahameng le ho satalla
E loketseng bakeng sa lits'ebetso tse phahameng tsa matla a phahameng
Meeli
Ho hanyetsa ha lik'hemik'hale ho hanyetsa Halogens le li-acine tsa tsona ho kenyeletsoa bromine, chlorine, fluor, hf
Likopo
Likhokahano
Mabotho a Motlakase
Likarolo tsa Ts'ebetso ea Lijo tsa Ts'ebetso
Likarolo tsa oli le khase tsa mohatla
Likarolo tsa sebopeho
Thepa ea Tloaelo ea Ketron ® GF30 Peek
| Description | Value | ||
| Material Type | Semi-Crystalline Thermoplastic | ||
| Chemical Name | PEEK Polyetheretherketone | ||
| Trade Name | Ketron® GF30 PEEK | ||
| Additives | 30% Glass | ||
| Color | Natural | ||
| Manufacturer | Quadrant | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.51 |
| ASTM D792 | lb/in³ | 0.055 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.1 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 0.3 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 14000 |
| Tensile Modulus | ASTM D638 | psi | 1000000 |
| Tensile Elongation at Break | ASTM D638 | % | 2 |
| Flexural Strength | ASTM D790 | psi | 23000 |
| Flexural Modulus | ASTM D790 | psi | 1000000 |
| Compressive Strength | ASTM D695 | psi | 22000 |
| Compressive Modulus | ASTM D695 | psi | 550000 |
| Hardness | ASTM D785 | NA | Rockwell M103 (R126) |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 0.8 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 1.2 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 232 |
| ASTM D648 | °F at 264 psi | 450 | |
| Melting Point Temp | ASTM D3418 | °C | 340 |
| ASTM D3418 | °F | 644 | |
| Max Continuous Operating Temp | °C | 249 | |
| °F | 480 | ||
| Minimum Operating Temp | °C | -60 | |
| °F | -76 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 2.98 |
| Flammability Rating | UL94 | NA | V-0 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Strength | ASTM D149 | V/mil | 500 |
| Surface Resistivity | ASTM D257 | ohm/square | >10^13 |
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Tlatsa tlhaiso-leseling e eketsehileng e le hore e ka ikopanya le uena kapele
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Contact Now