| Mofuta oa Lekhetho: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Laela: | 1 Kilogram |
| Lipalangoang: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Setšoantšo sa No.: TECAPEEK RP natural
Mochine: Tecapeek
| Ho rekisa lihlopha | : | Kilogram |
| Mofuta oa Sephutheloana | : | Sephutheloana sa kantle ho naha |
The file is encrypted. Please fill in the following information to continue accessing it
Tecapeek Rp ea tlhaho e ka bapisoa le mofuta oa fossil e thehiloeng ho Fossil 'me e khetholloa ke thepa e ikhethang ea ho betla mahopong, haholo mochesong o phahameng. Lintho tse kotsi tse nang le pherekano li boetse li tsebahala ka ho hanyetsa ka lik'hemik'hale le lithemparetjha tsa kopo tsa ho fihlela 260 ° C. Ka lebaka la botsitso ba eona bo botle ba eona bo boholo le ho hanyesa le phahameng haholo, ho loketse haholo bakeng sa likarolo tsa thepa e hlokang.
Ho etsa hore ho behe ho mo tlohela matla a tequek RP ea tlhaho ka sebopeho sa peek, polasetiki e entsoeng ka peek e entsoeng ho polasetiki ea polasetiki.
Tecapeek Rp Natural ke karolo ea "Resetion ea Dading" bakeng sa tharollo ea daba "e kenyelletsang lihlahisoa tse eketsang ruri ho ea ts'ireletso ea tikoloho ka hloko. 
Lintlha
Booksication ea lik'hemik'hale
Peek (Polyetherechanetone)
Mmala
Beige
Letsoalo
1.31 g / cm3
Likarolo tsa sehlooho
ho tsoa ho lihlahisoa tse sa sebetseng
ho betlight flame ea leholimo
mocheso o motle oa mocheso
Mechine e metle
Ho hanyetsa khahlanong le radiation e phahameng ea matla
Ho hanyetsa ka Chection ea lik'hemik'hale haholo
Khanyetso e phahameng e phahameng
hydrolysis le tse matla tsa Steam li loantša
Liindasteri tse Tsoang
Mahlale a lik'hemik'hale
boenjineri ba mechini
Lisebelisoa tsa motlakase
Indasteri ea matla
theknoloji ya lijo
indasteri ea oli le khase
Thepa ea sefofane le Aerospace
Indasteri ea likoloi
Semiconductor theknoloji
Mahlale a Xuum
Leqephe la data la THENAN
| Mechanical properties | ||||
| MECHANICAL PROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| Modulus of elasticity | 4200 | MPa | 1mm/min | DIN EN ISO 527-2 |
| (tensile test) | ||||
| Tensile strength | 109 | MPa | 50mm/min | DIN EN ISO 527-2 |
| Tensile strength at yield | 109 | MPa | 50mm/min | DIN EN ISO 527-2 |
| Elongation at yield (tensile test) | 5 | % | 50mm/min | DIN EN ISO 527-2 |
| Elongation at break (tensile test) | 15 | % | 50mm/min | DIN EN ISO 527-2 |
| Flexural strength | 175 | MPa | 2mm/min, 10 N | DIN EN ISO 178 |
| Modulus of elasticity | 4200 | MPa | 2mm/min, 10 N | DIN EN ISO 178 |
| (flexural test) | ||||
| Compression modulus | 3400 | MPa | 5mm/min, 10 N | EN ISO 604 |
| Compression strength | 23/43/102 | MPa | 1% / 2% / 5% | EN ISO 604 |
| Impact strength (Charpy) | n.b. | kJ/m2 | max. 7,5J | DIN EN ISO 179-1eU |
| Notched impact strength (Charpy) | 4 | kJ/m2 | max. 7,5J | DIN EN ISO 179-1eA |
| Shore hardness | 89 | D | DIN EN ISO 868 | |
| Thermal properties | ||||
| THERMAL PROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| Glass transition temperature | 150 | C | DIN EN ISO 11357 | |
| Melting temperature | 341 | C | DIN EN ISO 11357 | |
| Heat distortion temperature | 162 | C | HDT, Method A | ISO-R 75 Method A |
| Thermal conductivity | 0.27 | W/(k*m) | ISO 22007-4:2008 | |
| Specific heat | 1.1 | J/(g*K) | ISO 22007-4:2008 | |
| Service temperature | 300 | C | short term | NN |
| Service temperature | 260 | C | long term | - |
| Thermal expansion (CLTE) | 5 | 10-5*1/K | 23-60°C, long. | DIN EN ISO 11359-1;2 |
| Thermal expansion (CLTE) | 5 | 10-5*1/K | 23-100°C, long. | DIN EN ISO 11359-1;2 |
| Thermal expansion (CLTE) | 7 | 10-5*1/K | 100-150°C, long. | DIN EN ISO 11359-1;2 |
| Electrical properties | ||||
| ELECTRICAL PROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| surface resistivity | 1015 | Ω | Silver electrode, 23°C, 12% r.h. | - |
| volume resistivity | 1015 | Ω*cm | Silver electrode, 23°C, 12% r.h. | DIN IEC 60093 |
| Dielectric strength | 73 | kV/mm | 23°C, 50% r.h. | ISO 60243-1 |
| Resistance to tracking (CTI) | 125 | V | Platin electrode, 23°C, 50% r.h., solvent A | DIN EN 60112 |
| Other properties | ||||
| OTHER PROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| Resistance to hot water/ bases | + | - | ||
| Flammability (UL94) | V0 | listed (value at 1.5mm) | DIN IEC 60695-11-10; | |
| Resistance to weathering | - | - | ||
| Water absorption | 0.02 - 0.03 | % | 24h / 96h (23°C) | DIN EN ISO 62 |
| Water absorption | % | saturation (23°C) | DIN EN ISO 62 | |
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Tlatsa tlhaiso-leseling e eketsehileng e le hore e ka ikopanya le uena kapele
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Contact Now