| Mofuta oa Lekhetho: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Laela: | 1 Kilogram |
| Lipalangoang: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Setšoantšo sa No.: GEHR™ PEEK Unfilled natural
Mochine: Gehr
| Ho rekisa lihlopha | : | Kilogram |
| Mofuta oa Sephutheloana | : | Sephutheloana sa kantle ho naha |
The file is encrypted. Please fill in the following information to continue accessing it
Gehr Peekettm
Polyotherthertetone e ka sebelisoa mocheso o phahameng haholo (ka +500 ° F) Mme e bonts'a matla a makatsang, ho thata, matla, matla le maemo a fetelletseng. Peō e bonts'a ho hanyetsa ha lik'hemik'hale, thepa e ntle haholo ho fihlela ho ea phethola mefuta eohle ea radiation (leha ho le joalo mahlaseli a mangata a radiation Leholimo ke thepa ea ho ikhula ho latela Ul 94.
Thepa ea Gehr Faekttm
Lenane la sehlahisoa
Matla a phahameng haholo
Ho ba thata haholo (le ka mocheso o tlase)
Botsitso bo phahameng haholo ba futhumatsang
Khanyetso e phahameng haholo
Botsitso bo phahameng haholo bo tsitsitseng haholo
Khanyetso e phahameng haholo ea radiation
Ho hanyetsa ho hloeka ha hydrolys haholo
Matla a tlase a tlase
Khanyetso e tlase ho Acetone
Likopo
Ho beoa likhetla
Piston Rings
Litulo tsa Valve
Li-gears
Lials
Ho fofa
Cog Wheels
Moputsi Vanes
Li-FTOTINGS
Likhokahano tsa li-plug bakeng sa chromatography
Makhoba a Waiter
Semiconductor indasteri
Thepa ea senotlolo
Ho hanyetsa hantle ka lik'hemik'hale
Khanya ea mocheso o phahameng
Ha e angoe ke ho pepesetsoa ka metsi a chesang kapa mouoane
Ho hanyetsa haholo ka mongobo
Thepa e tlase e fapaneng
Tahlehelo ea bongata ka botlalo (TML%) .31%
Lisebelisoa tse sa fetoheng tse sa fetoheng (CVCM%) 0.00%
Mouoane oa metsi o fetohileng (WVR%) 0.06%
Meeli
Ho hanyetsa ha lik'hemik'hale ho hanyetsa Halogens le li-acine tsa tsona ho kenyeletsoa bromine, chlorine, fluor, hf
Melemo e tloaelehileng ea Gehr Peek ™ ea tlhaho
| Description | Value | ||
| Material Type | Semi-Crystalline Thermoplastic | ||
| Chemical Name | PEEK Polyetheretherketone | ||
| Additives | Unfilled | ||
| Color | Tan | ||
| Manufacturer | Gehr | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.31 |
| ASTM D792 | lb/in³ | 0.047 | |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 0.4 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 13,900 |
| Tensile Modulus | ASTM D638 | psi | 522,000 |
| Tensile Elongation at Break | ASTM D638 | % | 45 |
| Flexural Strength | ASTM D790 | psi | 22,000 |
| Flexural Modulus | ASTM D790 | psi | 566,000 |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 1.3 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 3.2 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 162 |
| ASTM D648 | °F at 264 psi | 324 | |
| Melting Point Temp | ASTM D3418 | °C | 340 |
| ASTM D3418 | °F | 644 | |
| Max Continuous Operating Temp | UL 746B | °C | 260 |
| UL 746B | °F | 500 | |
| Minimum Operating Temp | UL 746B | °C | -40 |
| UL 746B | °F | -40 | |
| Thermal Conductivity | ASTM C177 | BTU-in/ft²-hr-°F | 2 |
| ASTM C177 | x 10-4 cal/cm-sec-°C | 6.89 | |
| Flammability Rating | UL94 | NA | V-0 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Strength | ASTM D149 | V/mil | 580 |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 3.2 |
| Surface Resistivity | ASTM D257 | ohm/square | > 10^13 |
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Tlatsa tlhaiso-leseling e eketsehileng e le hore e ka ikopanya le uena kapele
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Contact Now