| Mofuta oa Lekhetho: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU |
| Min. Laela: | 1 Kilogram |
| Lipalangoang: | Ocean,Land,Air,Express,Others |
| Port: | Shenzhen,Guangzhou,Hongkong |
Setšoantšo sa No.: ULTEM™ PEI PolyEtherImide with 30% Glass reinforced
Mochine: Ulm ™
| Ho rekisa lihlopha | : | Kilogram |
| Mofuta oa Sephutheloana | : | Sephutheloana sa kantle ho naha |
The file is encrypted. Please fill in the following information to continue accessing it
Ultem ™ 2300 Pei ke khalase e mengata ea 30% e matlafalitsoeng polyotherherimide. Ke Moamofous, morui ea phahameng o nang le lelakabe le nang le lelamebe e ikhethang le ho hanyetsa mocheso. E etsa lintho ka nako ea 340 ° F (171 ° F (171 ° C), e e etsa hore e be e loketseng Ke lehloeo la hydrolysis, ke lantinang ea acidic le ho khona ho mamella potoloho ea baahi ba bangata. Ultember ™ 23, 2300 e fana ka thata le ho tsitsipana ho ntlafala le ho lokisa litšobotsi tse ngata tsa bohlokoa tsa ulmtent tse sa phethahalang ™. Hangata ILMET ™ e tloaetse likarolo bakeng sa lisebelisoa tsa bongaka tse theko e tlaase, li-indlation tsa motlakase, tsa motlakase, le mefuta e fapaneng ea sebopeho le thata mochesong o phahameng.
Ultem ™ Peyetdimide (Pei) Ho ikoetlisa ka polasetiki ea Pei Sheep Ultem ™ Pei o fana ka botsitso bo boholo bo kopaneng le bohanyetsi bo kang ho hanyetsa ka lik'hemik'hale. Ultem ™ Pei ke hape o loantšana le lejoe le sa tloaelehang le mosi o matla . Khalase e matlafalitsoeng Ullated Iltem Matlafatso ea khalase e fana ka sehlahisoa se nang le karo-boima ba boima ba 'mele le matla a boima le matla a boima. Sehlopha sena sa khalase 30% se matlafalitsoe ke ultem e tloaelehileng ka ho fetisisa ™ mme e fumaneha habonolo ho tloha setoko ho tloha setoko se fumanehang habonolo le meralo ea mela.
Ilm ™ 2300 Pei ea Pei ea tlhaho ke khalase e fetelletseng ea 30% ea khalase e matlafalitsoeng ea Polyetdimide
Li-ILTE tsa Pei Ulte Fet Rod limaraka
Ultem® 1000
Ultem® 2100
Ultem® 2200
Ultem® 2400
Ultem® 2300 UALTETE Pe 1000 Sheet e ntlafalitsoeng e eketsa botsitso 'me e ntlafatsa botsitso ba makhopho a ho se phethe. Hape, kaha ke boitsebiso bo tšoanang, ba bohlokoa bo hloka ho nkuoa haeba bo etsoa monyako oa pholile. Haeba e sebelisoa, li-collec tsa botona tse seng tsa bosoeu bo lokela ho sebelisoa ho qoba ho kopana.
| Specification | Test | Value | Units |
| Specific Gravity, 73°F | D792 | 1.51 | – |
| Tensile Strength @ Yield, 73°F | D638 | 17,000 | psi |
| Tensile Modulus of Elasticity, 73°F | D638 | 800,000 | psi |
| Tensile Elongation (at break), 73°F | D638 | 3 | % |
| Flexural Strength, 73°F | D790 | 27,000 | psi |
| Flexural Modulus of Elasticity | D790 | 850,000 | psi |
| Shear Strength, 73°F | D732 | psi | |
| Compressive Strength – Ultimate | psi | ||
| Compressive Strength at 2% Deformation | D695 | psi | |
| Compressive Strength at 10% Deformation | D695 | 32,000 | psi |
| Deformation Under Load | < 1 | % | |
| Compressive Modulus of Elasticity, 73°F | D695 | 625,000 | |
| Compressive Strength ⊥ to Laminate (Modulus) | psi | ||
| Compressive Strength ⊥ to Laminate (Yield) | psi | ||
| Compressive Strength ⊥ to Laminate (Ultimate) | psi | ||
| Hardness, Durometer (Shore “D” scale) | D2240 | D86 | |
| Hardness, Rockwell (Scale as noted) | D785 | M112 (R127) | Rockwell M |
| Izod Impact, Notched @ 73°F | D256 Type A | 1 | ft.lbs/in. of notch |
| Coefficient of Friction (Dry vs Steel) Static | PTM 55007 | ||
| Coefficient of Friction (Dry vs Steel) Dynamic | PTM 55007 | ||
| Maximum Static Bearing Load (P) | PTM 55007 | 1,000 | psi |
| Maximum Unlubricated No Load Bearing Velocity (V) | PTM 55007 | ft/minute | |
| Maximum Limiting PV (Unlubricated) | PTM 55007 | psi x ft/min. | |
| Wear Factor “K” x 10-10 | PTM 55010 | Cubic in.-min/ft.lbs.hr | |
| Sand Wheel Wear/Abrasion Test | 80 | UHMW=100 | |
| Minimum Mating Surface Hardness | 30 | Rockwell (Brinnell) | |
| Coefficient of Linear Thermal Expansion | E-831 (TMA) | 1.1 | in/in/°F x 10-5 |
| Coefficient of Thermal Expansion // to Laminates | E-831 (TMA) | 1.1 | in/in/°F x 10-5 |
| Coefficient of Thermal Expansion I to Laminates | E-831 (TMA) | 1.1 | in/in/°F x 10-5 |
| Softening Point | 400 | °F | |
| Heat Deflection Temperature 264 psi | D648 | 410 | °F |
| Embrittlement Temperature | °F Min. | ||
| Continuous Service Temperature in Air | 340 | °F Max. | |
| Short Term Service Temperature | 360 | °F Max. | |
| Tg-Glass Transition (Amorphous) | D3418 | 410 | °F |
| Melting Point (Crystalline) Peak | D3418 | °F | |
| Thermal Conductivity | F433 | 1.56 | BTU-in/(hr/ft2°F) |
| Dielectric Strength Short Term | D149 | 770 | Volts/mil |
| Surface Resistivity | D257 | >1013 | ohm/cm |
| Volume Resistivity | D257 | ohm/cm | |
| Dielectric Constant, 106 Hz | D150 | 3.7 | |
| Dissipation Factor, 106 Hz | D150 | 0.0015 | |
| Flammability @ 3.1mm(1/8 in.) UL94 | UL94 | V-0 | |
| Arc Resistance | seconds | ||
| Water Absorption, Immersion 24 Hours | D570 (2) | 0.18 | % |
| Water Absorption, Immersion Saturation | D570 (2) | .9 | % |
| Machinability Rating | 1 | 1=easy, 10=difficult | |
| Rod Diameter Availability (Off the Shelf) | .50 | 6.0 | inches |
| Sheet Thickness Availability (Off the Shelf) | .030 | 3.0 | inches |
| Characteristics / Attributes | Superior Chemical Resistance / 340F Cont. Service Temp Excellent rigidity and stiffness. |
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Tlatsa tlhaiso-leseling e eketsehileng e le hore e ka ikopanya le uena kapele
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Contact Now