| Mofuta oa Lekhetho: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Laela: | 1 Kilogram |
| Lipalangoang: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Setšoantšo sa No.: SUSTAPEI GF 30 (ULTEM™ 2300)
Mochine: Fosapei
| Ho rekisa lihlopha | : | Kilogram |
| Mofuta oa Sephutheloana | : | Sephutheloana sa kantle ho naha |
The file is encrypted. Please fill in the following information to continue accessing it
Fosapei Gf 30 (Ultem ™ 23,000) ke khalase ea 30% e hlahisang ho satalla hape, matla le tsitsipano ea lits'ebetso tsa sebopeho.
Litšobotsi
Mocheso o phahameng oa mocheso o phahameng
Letlapa le phahameng la redament
Mosi oa mosi o tlase haholo
Ho satalla haholo, matla le ho thatafala ho feta sebaka sa mocheso o pharaletseng
botsitso bo phahameng bo boholo bo lebang tlasa mocheso
Thepa ea senotlolo
Hdt Hdt ho feta pei e sa tsebeng letho
Matla a phahameng le ho satalla ho feta pei e sa tsebeng letho
Meeli
Ho hanyetsa ka lik'hemik'hale ho li-solvents tsa manyolo ebile li na le li-hydrocarbons tse ntle (ho kenyelletsa oli e mengata, mafura le mafura)
Likopo
Frieid ea foka le li-callctors
Li-inceletor tsa motlakase
Seletso ea Kantle ho Tlhatlhobo
Lisebelisoa tsa bongaka
Likarolo tsa lifofane
Likarolo tsa semiconductor
T Ypical Thepa ea Meapei GF 30 UAME ® 2300
| Description | Value | ||
| Material Type | Amorphous Thermoplastic | ||
| Chemical Name | PEI Polyetherimide | ||
| Trade Name | SustaPEI GF 30 | ||
| Additives | 30% Glass | ||
| Color | Tan | ||
| Manufacturer | Rochling | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.51 |
| ASTM D792 | lb/in³ | 0.055 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.2 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 1.2 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 20,000 |
| Tensile Modulus | ASTM D638 | psi | 900,000 |
| Tensile Elongation at Break | ASTM D638 | % | 3 |
| Flexural Strength | ASTM D790 | psi | 33,000 |
| Flexural Modulus | ASTM D790 | psi | 950,000 |
| Compressive Strength | ASTM D695 | psi | 31,000 |
| Hardness | ASTM D785 | NA | Rockwell M115 |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 1 |
| Dynamic Coefficient of Friction | NA | 0.24 | |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 1.1 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 210 |
| ASTM D648 | °F at 264 psi | 410 | |
| Melting Point Temp | ASTM D3418 | °C | 228 |
| ASTM D3418 | °F | 442 | |
| Max Continuous Operating Temp | °C | 171 | |
| °F | 340 | ||
| Minimum Operating Temp | °C | -50 | |
| °F | -58 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 1.8 |
| Flammability Rating | UL94 | NA | V-0 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Strength | ASTM D149 | V/mil | 770 |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 3.7 |
| Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.002 |
| Surface Resistivity | ASTM D257 | ohm/square | 10^16 |
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Tlatsa tlhaiso-leseling e eketsehileng e le hore e ka ikopanya le uena kapele
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Contact Now