| Mofuta oa Lekhetho: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU |
| Min. Laela: | 1 Kilogram |
| Lipalangoang: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Setšoantšo sa No.: Duratron® D7000 PI Polyimide
Mochine: Duratron
| Ho rekisa lihlopha | : | Kilogram |
| Mofuta oa Sephutheloana | : | Sephutheloana sa kantle ho naha |
The file is encrypted. Please fill in the following information to continue accessing it
Duratron® D7000 PI Hot Coperession e entsoe ka mefuta e metle ea tlhabollo le litšoaneleho tsa tšebetso tsa motlakase bakeng sa lits'ebetso tse phahameng tsa ts'ebetso bakeng sa lits'ebetso tse phahamengfatsang. Ntle le litšobotsi tsena, Duratron® ® D7000 PI e fana ka khanyetso e ntle ea lik'hemik'hale, matla a phahameng le ho tsitsipana le ho tsitsipana le ho tsitsipana le ho tsitsipana Ka mabaka ana, Duratron®® D7000 pi e bonoa e le tharollo e nepahetseng bakeng sa li-aspula, lilimoto tse ngata, litulo le li-gages. 
Thepa ea thepa
Polelo e ntle ea motlakase le ea futhumatsang
Ho hanyetsa ka lik'hemik'hale tse ntle
Matla a phahameng, ho thatafala le ho tsitsipana le maemo a phahameng mochesong o phahameng
Mokhethoa oa ho fetoloa ha tšepe: e bobebe le lubrication mahala
Li-geometries tse fumanehang
Duratron® D7000 PI Stock libopeho li akaretsa mefuta e fapaneng ea boholo ba li-geometeri e latelang: Rod, poleiti, bar
Molamu
Poleiti
Bar ea tubulalar
Mebala e teng
Duratron® D7000 PI STRES TOPS BIPS COS ka mebala e latelang: Chestnut
Likopo
Meputso le ho sebetsana le likarolo tsa khalase ea khalase le tsa polasetiki
Sethunya se chesang se nang le lerata la likhohla
Lisebelisoa tsa tšepe tsa liqoso tsa Aerospace - Lightweaight, lubriction mahala
Likarolo tsa sebopeho le tse rorisang semiconductor le lihlahisoa tsa elektroniki tsa elektroniki
Majoe a futhumetseng ka tlhahiso ea khalase
Thepa e tloaelehileng ea Duratron ® D 7000 pi e sa tsejoeng
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.4 |
| ASTM D792 | lb/in³ | 0.051 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.4 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 1.3 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 16000 |
| Tensile Modulus | ASTM D638 | psi | 583000 |
| Tensile Elongation at Break | ASTM D638 | % | 4 |
| Flexural Strength | ASTM D790 | psi | 20000 |
| Flexural Modulus | ASTM D790 | psi | 600000 |
| Compressive Strength | ASTM D695 | psi | 24000 |
| Compressive Modulus | ASTM D695 | psi | 450000 |
| Hardness | ASTM D785 | NA | Rockwell M110 |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 1.4 |
| Dynamic Coefficient of Friction | QTM 55007 (Dry vs Steel) | NA | 0.23 |
| Wear K Factor | QTM 55010 | in³-min/ft-lbs-hr | 50 |
| Limiting PV | QTM 55007 | psi-fpm | 32500 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./℉ | 2.7 |
| Heat Deflection Temp | ASTM D648 | ℃ at 264 psi | 360 |
| ASTM D648 | ℉ at 264 psi | 680 | |
| Max Continuous Operating Temp | ℃ at 264 psi | 304 | |
| ℉ | 580 | ||
| Minimum Operating Temp | ℃ at 264 psi | -195 | |
| ℉ | -319 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-℉ | 1.53 |
| Flammability Rating | UL94 | NA | V-0 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Strength | ASTM D149 | V/mil | 700 |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 3.41 |
| Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.0038 |
| Surface Resistivity | ASTM D257 | ohm/square | >10^13 |
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Tlatsa tlhaiso-leseling e eketsehileng e le hore e ka ikopanya le uena kapele
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Contact Now