| Mofuta oa Lekhetho: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Laela: | 1 Kilogram |
| Lipalangoang: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Setšoantšo sa No.: Rulon® W2 PTFE Carbon Filled Polymer
Mochine: Rulon
| Ho rekisa lihlopha | : | Kilogram |
| Mofuta oa Sephutheloana | : | Sephutheloana sa kantle ho naha |
The file is encrypted. Please fill in the following information to continue accessing it
E entsoe ka metsi a hloekileng ka lebaka la Rulon w2 e fana ka e 'ngoe ea litefiso tse ntlehali, hammoho le likhohlano tse nang le litlhoro tse ncha tsa metsi a likopo tse ncha. Rulon W2 Theot ea bohlokoa ea bohlokoa ea Rulon W2 e hlile e ntlafala ha e koloba, ha e utloe mongobo, mme o ka thusa ho thibela khatello ea maikutlo tikolohong e kolobisitsoeng.
E lumellana le libaka tse ngata tsa tšepe le libaka tse bonolo, Rulon W2 le tsona li hlokahala ho hanyetsa ha lik'hemifi le matla a motlakase a phahameng. 'Me boitsebiso bo na le dwgv (Europe) e netefalitsoeng bakeng sa ho kopana ka kotloloho le metsi a nooang.
Rulon® w2 e etsoa bakeng sa lits'ebetso tse ncha tsa metsi. Ho fana ka likhohlano tse tlase le litšobotsi tse ntle tse khabisitsoeng likolong tse ncha tsa metsi a hloekileng. E lumellana le libaka tse ngata tsa tšepe le libaka tse bonolo tsa ho holisa. O fapane le phapang e ntle ho senya 16 J Ha khanyetso e phahameng ea lik'hemik'hale e hlokahala. Ha ea lokela ho sebelisoa libakeng tse bonolo haholo tsa mamati kapa moo ho hlokahala tlhahlobo ea motlakase.
Thepa ea senotlolo
E ntle haholo bakeng sa Steam, e Monyenyane le e omileng
E entsoe bakeng sa likopo tse ncha tsa metsi
Tekanyo e tlase haholo ka metsing a hloekileng
E tsamaisana le libaka tse ngata tsa meriti tsa tšepe
Karolo ea khatello ea boleng (e tsoelang pele) (MPA XM / S): 10,000pv (.35)
Boholo ba khatello ea PSI (Static) (MPA): 1,000 psi (6.9)
Boholo ba Velocity - SFM (ha ho na moroalo) m / s): 400 (2)
Shaft Hardness Bonyane: RB25
Shaft qetellong Ra μin9 (μm): 8-16 (.2-.4)
Shaft boitsebiso: Ho thata le ho makala ka thata le lesira
Meeli
Ho latela breep, phallo e batang
Likopo tse thatafatsang
Eseng bakeng sa ho sebelisoa ka libaka tse bonolo tse bonolo
Eseng inplator ea motlakase
Likopo
Likopo tse ncha tsa metsi
Thepa e tloaelehileng ea Rulon ® w2 (e ntšo)
| Description | Value | ||
| Material Type | Semi-Crystalline Thermoplastic Fluoropolymer | ||
| Chemical Name | PTFE Polytetrafluoroethylene | ||
| Trade Name | Rulon®W2 | ||
| Additives | Proprietary Additives | ||
| Color | Black | ||
| Manufacturer | Saint Gobain | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 2.1 |
| ASTM D792 | lb/in³ | 0.076 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.01 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 0.01 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D4894 | psi | 1,800 |
| Tensile Elongation at Break | ASTM D4894 | % | 70 |
| Static Coefficient of Friction | NA | 0.3 | |
| Dynamic Coefficient of Friction | NA | 0.15 | |
| Limiting PV | psi-fpm | 10,000 | |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 7 |
| Max Continuous Operating Temp | °C | 288 | |
| °F | 550 | ||
| Minimum Operating Temp | °C | -240 | |
| °F | -400 | ||
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Tlatsa tlhaiso-leseling e eketsehileng e le hore e ka ikopanya le uena kapele
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Contact Now