| Mofuta oa Lekhetho: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU,DDP |
| Min. Laela: | 1 Kilogram |
| Lipalangoang: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Setšoantšo sa No.: Rulon® 1410
Mochine: Rulon
| Ho rekisa lihlopha | : | Kilogram |
| Mofuta oa Sephutheloana | : | Sephutheloana sa kantle ho naha |
The file is encrypted. Please fill in the following information to continue accessing it
Khauta ka 'mala, Rulon 1410 e lumellana le lik'hemik'hale tse ngata le lubricants, e e etsa lihlahisoa tse loketseng bakeng sa subrate.
Rulon 1410 e fana ka thepa e tšoanang ho Rulon 1045 - ka bobeli ke lisebelisoa tse ntle bakeng sa likopo tse batlang ho sebetsa ha litiiso. Rulon 1045 e fana ka molemo o eketsehileng oa chelete e ngata ea matla ho tsoa ho katleho ea ho tiisa.
Rulon® 1410 ke lisebelisoa tsa mebala ea khauta tse sebelisoang likopo tse hlokang melapo e phahameng. E sebelisoa ho lisebelisoa tsa tiiso le lithibelo tse feto-fetohang.
Rulon® 1410 e na le clTE e phahameng le PV e tlase ho feta lits'ireletso tse ngata.
Thepa ea senotlolo
E ntle haholo bakeng sa Steam, e kolobisitsoeng, e omileng le ea vacuum
Ho hanyetsa ha lik'hemik'hale tse ikhethang
E lumellana le libricants tse ngata tsa khoebo
Boemo ba khatello ea maikutlo (bo ntse bo tsoela pele) (MPA XM / S): 7,500pv (.26)
Boholo ba khatello ea PSI (Static) (MPA): 750 PSI (5.2)
Boholo ba Velocity - SFM (ha ho na moroalo) m / s): 400 (2)
Shaft Hardness Bonyane: RB25
Shaft qetellong Ra μin9 (μm): 8-16 (.2-.4)
Shaft Lintho:
Meeli
Ho latela breep, phallo e batang
Likopo tse thatafatsang
Likopo
Litiiso tsa flip
Lipontšo tsa Tikoloho
Lintho tse ling tsa liner
Thepa e tloaelehileng ea Rulon ® 1410 (khauta)
| Description | Value | ||
| Material Type | Semi-Crystalline Thermoplastic Fluoropolymer | ||
| Chemical Name | PTFE Polytetrafluoroethylene | ||
| Trade Name | Rulon®1410 | ||
| Additives | Proprietary Additives | ||
| Color | Gold | ||
| Manufacturer | Saint Gobain | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 2.2 |
| ASTM D792 | lb/in³ | 0.079 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.01 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 0.01 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D4894 | psi | 2,150 |
| Tensile Elongation at Break | ASTM D4894 | % | 210 |
| Static Coefficient of Friction | NA | 0.2 | |
| Dynamic Coefficient of Friction | NA | 0.1 | |
| Limiting PV | psi-fpm | 7,500 | |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 8.6 |
| Max Continuous Operating Temp | °C | 288 | |
| °F | 550 | ||
| Minimum Operating Temp | °C | -240 | |
| °F | -400 | ||
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Tlatsa tlhaiso-leseling e eketsehileng e le hore e ka ikopanya le uena kapele
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Contact Now