| Mofuta oa Lekhetho: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU |
| Min. Laela: | 1 Kilogram |
| Lipalangoang: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Setšoantšo sa No.: TECASON® P MT XRO PPSU Radel® R
Mochine: Tekason
| Ho rekisa lihlopha | : | Kilogram |
| Mofuta oa Sephutheloana | : | Sephutheloana sa kantle ho naha |
The file is encrypted. Please fill in the following information to continue accessing it
TACACE P MT XRO e kopanya Profil ea setereke e ntle ea PPSU ka setata se opacifer. Sesebelisoa sena se lumella khetho e eketsehileng bakeng sa lisebelisoa tse tloaelehileng tsa lisebelisoa tsa PPSU bakeng sa liteko tsa masapo bakeng sa liteko tse ling le lisebelisoa tse ling, 'me u li lumelle sesosa sa fefoncopy le x-ray. TACACA P MT XRO e fumaneha ka mebala e mengata le boholo.
Lintlha
Booksication ea lik'hemik'hale
Ppsu (polyphenylfone)
Mmala
Bone
Letsoalo
1.36 g / cm3
Likarolo tsa sehlooho
X-Ray Opaque
matla a phahameng a futhumatsang le a mochini
mocheso o motle oa mocheso
hydrolysis le tse matla tsa Steam li loantša
Matla a Molemohali
Khanyetso e phahameng ea Garma Garman
Ho hanyetsa ka lik'hemik'hale tse ntle tsa lik'hemik'hale
matla a phahameng
Liindasteri tse Tsoang
Mahlale a Bongaka
| MECHANICAL PROPERTIES | VALUE | UNIT | CONDITION | TEST METHOD |
|---|---|---|---|---|
| Tensile strength at yield | 11,500 | psi | @ 73 °F | ASTM D 638 |
|
Modulus of elasticity (tensile test) |
420,000 | psi | @ 73 °F | ASTM D 638 |
| Elongation at break (tensile test) | 35 | % | @ 73 °F | ASTM D 638 |
| Flexural strength | 18,000 | psi | @ 73 °F | ASTM D 790 |
|
Modulus of elasticity (flexural test) |
350,000 | psi | @ 73 °F | ASTM D 790 |
| Impact strength (Izod) | 1.6 | ftlbsin | @ 73 °F | ASTM D 256 |
| Rockwell hardness | 126 | - | @ 73 °F, R scale | ASTM D 785 |
| Rockwell hardness | 92 | - | @ 73 °F, M scale | ASTM D 785 |
| Compression strength | 1,750 | psi | @1% strain, 73 °F | ASTM D 695 |
| Compression strength | 13,700 | psi | @ 73 °F, 10% strain | ASTM D 695 |
| Compression modulus | 225,000 | psi | @ 73 °F | ASTM D 695 |
| OTHER PROPERTIES | VALUE | UNIT | CONDITION | TEST METHOD |
|---|---|---|---|---|
| Moisture absorption | 0.19 | % | @ 24 hrs, 73 °F | ASTM D 570 |
| Item # | Item Name | Stock Shapes | Chemical Designation | Colour | Density | |
|---|---|---|---|---|---|---|
| 1097 | TECASON P MT XRO® Black PPSU plastic (Polyphenylsulfone) | PPSU plastic (Polyphenylsulfone) | Black | |||
| 1098 | TECASON P MT XRO® Blue PPSU (Polyphenylsulfone) |
Rods Plates Tubes |
PPSU (Polyphenylsulfone) | Blue | 1.36 g/cm³ | |
| 1099 | TECASON P MT XRO® Bone PPSU (Polyphenylsulfone) |
Rods Plates Tubes |
PPSU (Polyphenylsulfone) | Bone | 1.36 g/cm³ | |
| 1100 | TECASON P MT XRO® Green PPSU (Polyphenylsulfone) |
Rods Plates Tubes |
PPSU (Polyphenylsulfone) | Green | 1.36 g/cm³ | |
| 1101 | TECASON P MT XRO® Grey PPSU (Polyphenylsulfone) |
Rods Plates Tubes |
PPSU (Polyphenylsulfone) | Grey | 1.36 g/cm³ | |
| 1102 | TECASON P MT XRO® Red PPSU (Polyphenylsulfone) |
Rods Plates Tubes |
PPSU (Polyphenylsulfone) | Red | 1.36 g/cm³ | |
| 1103 | TECASON P MT XRO® Yellow PPSU (Polyphenylsulfone) |
Rods Plates Tubes |
PPSU (Polyphenylsulfone) | Yellow | 1.36 g/cm³ | |
| 1104 | TECASON P Black (Radel 5500) PPSU (Polyphenylsulfone) |
Rods Plates Tubes |
PPSU (Polyphenylsulfone) | Black | 1.29 g/cm³ |
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Tlatsa tlhaiso-leseling e eketsehileng e le hore e ka ikopanya le uena kapele
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Contact Now