| Mofuta oa Lekhetho: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU |
| Min. Laela: | 1 Kilogram |
| Lipalangoang: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Setšoantšo sa No.: Duratron® T7130 PAI Polyamide-imide 30% carbon fiber
Mochine: Duratron
| Ho rekisa lihlopha | : | Kilogram |
| Mofuta oa Sephutheloana | : | Sephutheloana sa kantle ho naha |
The file is encrypted. Please fill in the following information to continue accessing it
Duratron® T7130 Pai polyamide-nide ke sehlopha sa carbon fiber se fanang ka sepelaelo se ikhethileng, le ho roala ka mokhoa o tlaase ka ho hlaka thepa eohle ea Pai. Litšobotsi tsena li susumetsa Duratron® T7130 pai matla a ho thibela lits'ebeletso tse ngata tsa khatello ea lisebelisoa tse saletseng, li etsa khetho ena khetho e tšepahalang bakeng sa litlhoko tse telele tsa tšebetso ea nako e telele. E ka etsoa habonolo ho mamella ho atamelanang le haufi ha likarolo tse etsahalang li hloka.
Thepa ea thepa
Ho satalla le ho tsitsipana le botsitso
Ts'ebetso e sa koaheloa
Semelo se tlase haholo se ke keng sa eketseha (CITE)
Mak'heketsi le ho hanyetsana
Ka tlhaho ea tlhaho ea ho hanyetsa le ho lekana le likhohlano (cof)
Li-geometries tse fumanehang
Duratron® T7130 pai Stock Shanepes
Mebala e teng
Duratron® T7130 pai stock mekhahlelo e latelang: e ntšo
Thepa ea senotlolo
Permal Perrmal ho isa ho 500 ° F (260 ° C) e tsoelang pele e sebelisa temp
Carbon e matlafalitsoeng
Matla a phahameng le Mosilus
Khatiso e ikhethang
Ho hanyetsa hantle ho hanyetsa
Bokhoni bo botle bo botle bo boholo
ClTe e tlase haholo ea cltra ea mohala oa li-turmar e nang le li-smarmal ea pai - haufi le tšepe
Meeli
Lisebelisoa tsa sehlopha sa duratrone
Ho tsitsipana ha li-forrmal ho felletseng ho ka etsahala haeba likarolo tsa masela a hlaseloa ka potlako li pepesoa mocheso ka holimo ho 400 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F (205 ° F
Ho hanyetsa ka lik'hemik'hale ho li-likepe tse matla, mouoane le mocheso o phahameng oa li-acid
Likopo
Likarolo tsa Aerospace
Li-gears
Matla a matla a phahameng a khatello ea sebopeho sa sebopeho
Houshis
Ba susumetsang ba susumetsang
Phetoho ea tšepe
Likarolo tsa oli le khase
Pisston
Shrouds
Seketsoana sa Compressor le Pones Vanes
| DETAIL | |
| Description | Value |
| Material Type | Imidized Amorphous Thermoplastic |
| Chemical Name | PAI Polyamide-imide |
| Trade Name | Duratron® T7130 PAI |
| Additives | 30% Carbon Fiber |
| Color | Black |
| Manufacturer | Mitsubishi Chemical Advanced Materials |
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.47 |
| ASTM D792 | lb/in³ | 0.053 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.3 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 1.5 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 22000 |
| Tensile Modulus | ASTM D638 | psi | 12000000 |
| Tensile Elongation at Break | ASTM D638 | % | 2.5 |
| Compressive Strength | ASTM D695 | psi | 37000 |
| Compressive Modulus | ASTM D695 | psi | 1000000 |
| Hardness | ASTM D785 | NA | Rockwell E91 |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 0.9 |
| Dynamic Coefficient of Friction | QTM 55007 (Dry vs Steel) | NA | 0.3 |
| Wear K Factor | QTM 55010 | in³-min/ft-lbs-hr | 75 |
| Limiting PV | QTM 55007 | psi-fpm | 14000 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./℉ | 0.5 |
| Heat Deflection Temp | ASTM D648 | ℃ at 264 psi | 282 |
| ASTM D648 | ℉ at 264 psi | 540 | |
| Max Continuous Operating Temp | ℃ at 264 psi | 260 | |
| ℉ | 500 | ||
| Minimum Operating Temp | ℃ at 264 psi | -200 | |
| ℉ | -328 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-℉ | 3.6 |
| Flammability Rating | UL94 | NA | V-0 |
| COMPLIANCE | |
| Description | Value |
| FDA | No |
| USDA | No |
| NSF | No |
| 3-A Dairy | No |
| Canadian Food Inspection Agency | No |
| USP Class VI | No |
| OTHER | |
| Description | Value |
| UV Resistant | Yes |
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Tlatsa tlhaiso-leseling e eketsehileng e le hore e ka ikopanya le uena kapele
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Contact Now