| Mofuta oa Lekhetho: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Min. Laela: | 1 Kilogram |
| Lipalangoang: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Setšoantšo sa No.: Vespel ® Polyimide SCP-5000 Unfilled
Mochine: DuPont ™ VESPEL ®
| Ho rekisa lihlopha | : | Kilogram |
| Mofuta oa Sephutheloana | : | Sephutheloana sa kantle ho naha |
The file is encrypted. Please fill in the following information to continue accessing it
DuPON ™ ®SCP-5000 ke pompong ea polyimide e fanang ka modulus e phahameng le bokantle le botsitso bo ntlafatsang bo boholo. Ha ho bapisoa le polyimides ea setso, e fana ka ho satalla ha matla ka lebaka la lithemparetjha tse phahameng.
Litšobotsi tsa Ts'ebetso:
Ultra-High Bouthali bo phahameng
Ho tsitsa e phahameng haholo ho tsitsipanya
Ho satalla ha phahameng
Modulus e phahameng le bokaholimo ba lefatše
Ho Ts'oara Lihloana tsa ho hanyetsa ha lik'hemik'hale
Mocheso o phahameng
PUSELETSO LE HO FIHLELA LE HO FIHLELA
Likopo
Meroho e phahameng ea temp-temp
Mahlahlobi
Lials
Bapalami
Washer Washer
Litulo tsa Valve
Thepa e tloaelehileng ea Vespel ® Polyimide Scp-5000 e sa tsebeng letho
| Description | Value | ||
| Material Type | Imidized Amorphous Thermoplastic | ||
| Chemical Name | PI Polyimide | ||
| Trade Name | DuPont™ Vespel® Polyimide SCP-5000 Equivalent | ||
| Additives | Unfilled | ||
| Color | Light Brown | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.46 |
| ASTM D792 | lb/in³ | 0.053 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.08 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 23,600 |
| Tensile Elongation at Break | ASTM D638 | % | 7.5 |
| Flexural Strength | ASTM D790 | psi | 36,800 |
| Flexural Modulus | ASTM D790 | psi | 836,000 |
| Compressive Strength | ASTM D695 | psi | 33,400 |
| Compressive Modulus | ASTM D695 | psi | 1,314,000 |
| Hardness | ASTM D785 | NA | Rockwell E95 |
| Dynamic Coefficient of Friction | COF@PV = 3.5 MPa m/s (100K psi-ft/min)* | NA | 0.15 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 2.6 |
| Max Continuous Operating Temp | °C | 260 | |
| °F | 500 | ||
| Minimum Operating Temp | °C | -195 | |
| °F | -319 | ||
| Flammability Rating | UL94 | NA | V-0 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 3.3 |
| Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.001 |
| Surface Resistivity | ASTM D257 | ohm/square | 10^15 |
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Tlatsa tlhaiso-leseling e eketsehileng e le hore e ka ikopanya le uena kapele
Polelo ea boinotšing: Lekunutu la hau le bohlokoa haholo ho rona. Khamphani ea rona e tšepisa hore ha e etse hore u se ke ua senola tlhahisoleseling ea hau ho ea pele.
Contact Now